3:1 – Clear Cast Resin 320Gm( 240 gram resin 80 gram hardner)

₹275.00

Out of stock

Add to compare

Add to wishlist

Shipping and returns

Shipping

Orders are shipped within 2–4 working days.
Orders with custom products are shipped within 4–7 working days.
Delivery takes an additional 5–10 working days after dispatch.
In-store pickup is available once the order status is updated to “Ready to Pick-up.”

For more details:

See our Shipping Policy
See our International Shipping Policy

Returns and Exchanges

No additions, changes, returns, or exchanges are allowed once the order is confirmed.

For more details:

See our Return and Exchange Policy

Note

Once confirmed, orders cannot be cancelled.

Product care

Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.

Product details

Creative Resin Store boasts of the widest range of products related to Resin Art. Be it resin, pigments, Silicon moulds, MDF bases, glitters, stones and custom stickers – everything you need is right here!

Description

Resin’s 3:1 – Art Epoxy for pouring your creativity.

Specification	Value
Mixing Ratio	R:H – 3:1
Pot Life At 25° C	90 – 120 Min
Touch Dry	8 – 12 hours
Fully Cured	24 – 36 Hours
Measurement	By Weighing Scale
Viscosity At 25° C	500 – 800
Hardness	75 Shore D

Properties	Description
Best For	Silicon Mould Casting, Deep Casting & Top Coat
Transparency	Crystal Clear with Glass like transparency.
Bubble-Free	Bubble get automatically busted after mixing
Wetting property	Uniformly spread to the surface, resulting in a smooth and even layer without any gaps, shrinkage or bubbles
Consistency	Thin consistency for easy mixing that also improve Mould’s life.
Features	Non-yellowing, Moisture Free, Hard Cure & Conforms to ASTM Rules

For Deep Pour	Description
Layer	2nd layer pouring after 8-10 hrs.
Casting Thickness	Capable of casting up to 8-10 mm in a single layer.
Deep Pour	Capable of 2-3 inch (60 MM) deep pour in 6-8 layers.

Precautions	Guidelines
Application	Exercise caution in high humidity, low daylight, and low temperature conditions. – Maintain ambient temperature (20-35°C) and humidity below 65%. – Use vacuum to achieve air-free components in filled molds.
Mixing	Thoroughly mix manually or mechanically to eliminate haziness or streaks.- Mix small quantities to test your ratio
Safety	Wear personal protective equipment (PPE). – Avoid eye and skin contact; wash off with warm water if necessary. – Prevent inhalation of vapors, mist, or gas. Keep hardener bottle closed due to fuming tendency.